Spend the Holidays with Swarovski – December Inspiration Projects

Get inspired to create sparkling holiday jewelry with the Spend the Holidays with Swarovski program. Each month, you’ve been inspired by festive Swarovski colors and beautiful jewelry-making projects. In the final month of the program, we’re focusing on winter-themed projects that are perfect for the dazzling sparkle of Swarovski. Take a look at these inspirational jewelry projects from Swarovski to get inspired for the season and then find out how you can win Swarovski crystals in wintery colors during our giveaway.

White Forest Chandeliers

Swarovski earrings

Swarovski Crystals:

Qty 6 Swarovski 6mm Crystal AB Margarita Beads
Qty 6 Swarovski 8mm Crystal AB Margarita Beads
Qty 6 Swarovski 10mm Crystal AB Margarita Beads
Qty 2 Swarovski 12mm Crystal AB Margarita Beads
Qty 6 Swarovski 4mm Crystal Faceted Cube Beads
Qty 4 Swarovski 3mm Crystal AB Bicone Beads
Qty 4 Swarovski 4mm Crystal AB Bicone Beads
Qty 2 Swarovski 12mm Crystal AB Rivoli Stones

Other Supplies:

Qty 6 Silver 2-Inch Head Pins
Qty 2 TierraCast Rivoli Connectors (Try a Rivoli link and a 3-1 Connector)
Qty 1 Pair Silver Earwires
Qty 10 Oval Jump Rings
2-Part Epoxy Adhesive

Instructions:

Step 1: Using Rivoli connector, glue in one 12mm Rivoli. Repeat for pair and set aside to dry.
Step 2: Slip onto one silver headpin: one 4mm cube; one 10mm Margarita bead; one 8mm Margarita bead; one 6mm Margarita bead; one 3mm bicone.
Step 3: Turn a simple loop or wire wrap closed.
Step 4: Repeat steps 2 – 3 times 3 and set aside.
Step 5: Slip onto one silver headpin: one 4mm cube; one 12mm Margarita bead, one 10mm Margarita bead; one 8mm Margarita bead; one 6mm Margarita bead; one 4mm bicone.
Step 6: Turn a simple loop or wire wrap closed.
Step 7: Repeat steps 5 – 6 one more time and set aside.
Step 8: Using Rivoli connector, open an oval jump ring and attach the small tree component to the an outside loop on the connector. Repeat for opposite outside loop on connector.
Step 9: Open remaining jump rings. Link 4 jump rings to center loop on connector. Open last jump ring and attach large tree.
Step 10: Using the add-a-bead earwire, load on (1) 4mm bicone in Crystal AB. Turn a simple loop on the earwire. Open up the loop and attach to the top hole of the Rivoli connector.
Step 11: Repeat steps 8-10 to make second earring.

Zen Snowflake Drops

Winter Earrings

Swarovski Crystals:

Qty 2 Swarovski 4mm Crystal Bicone Beads
Qty 2 Swarovski 14mm Crystal Edelweiss Pendants

Other Supplies:

Qty 2 TierraCast Lotus Links
Qty 1 Pair TierraCast Earwires
Qty 7 Inches Cable Chain
Qty 6 Small Oval Jump Rings
Qty 2 4mm Round Jump Rings

Instructions:

Step 1: Cut the chain into four 1½” pieces and two ½” pieces and set aside.
Step 2: Using one 14mm crystal Edelweiss pendant, attach a 4mm round jump ring and attach to one ½” piece of chain. Using a small jump ring, attach chain to the bottom of the Lotus finding.
Step 3: Using one earwire, slide on one 4mm crystal bicone and make a simple loop. Attach one 1½” piece of chain to the earwire and using one small oval jump ring attach the other side of the chain to the left side of the large petal on the Lotus finding. Repeat this for the other side of the earring.
Step 4: Repeat Steps 2-3 for the second earring.

Fairies in Flight Bracelet

Winter Swarovski Bracelet

Swarovski Crystals:

Qty 9 Swarovski 8mm Crystal Golden Shadow Small Dome Beads (Try Crystal AB)
Qty 9 Swarovski 4mm Bright Gold Pearls
Qty 9 Swarovski 3mm Rhinestone Rondelles (Try this 3mm Daisy Spacer)

Other Supplies:

Qty 9 TierraCast Fairy Wing Beads
Qty 1 Lobster Clasp
Qty 2 8mm Jump Rings
Qty 2 4mm Oval Jump Rings
Qty 18 Inches Artistic Wire 22 Gauge

Instructions:

Step 1: Cut wire into 2” pieces and set aside.
Step 2: Using one piece of wire make a simple loop. Slide on one dome bead, one fairy wing bead, one pearl, and one Rondelle. Make a simple loop. Repeat 8 more times and set aside.
Step 3: Begin linking each Fairy component (head to tail) until all 9 are linked.
Step 4: Use second 8mm jump ring and attach to the bottom of the opposite fairy on the bracelet. Using the jump ring again and add the lobster clasp.

Floating Golden Rings

Swarovski Jewelry

Swarovski Crystals:

Qty 1 Swarovski 6mm Crystal Golden Shadow Bicone
Qty 2 Swarovski 14mm Crystal Blue Shade Edelweiss Pendants (try Crystal)
Qty 1 Swarovski 16.5mm Crystal Golden Shadow Pave Ring (try Crystal)
Qty 1 Swarovski 18.5mm Crystal Golden Shadow Pave Ring (Try Crystal)

Other Supplies:

Qty 2 1 1/2-Inch Head Pins
Qty 1 2-Inch Head Pin
Qty 18 Inches Cable Chain
Qty 1 Lobster Clasp
Qty 4 4mm Jump Rings

Instructions:

Step 1: Add a jump ring to each Edelweiss and set aside.
Step 2: Using one head pin, slide through one hole in the 16.5mm pave ring, make a simple loop, cut off excess wire and attach one of the Edelweiss pendants.
Step 3: Using a head pin, slide through the inner second hole in the 16.5mm pave ring, add the bicone bead and slide through the outer hole of the 18.5mm pave ring, bending the end to secure. Cut off excess wire.
Step 4: Using the eye pin, attach second Edelweiss pendant and slide through the inner second hole in the 18.5mm pave ring. Wire wrap to secure and cut off excess.
Step 5: Slide the chain through the loop made in step 4.
Step 6: Add a jump ring to one end of the chain. Add a jump ring and the lobster clasp to the other side to complete the necklace.

Enter Our Giveaway

You can win Swarovski crystals in gorgeous winter colors during our Spend the Holidays with Swarovski Giveaway. We’ll choose one lucky winner on Thursday, December 10, 2020. To enter, click here.

What winter jewelry are you making this season? Are you planning on making any of these projects? Let us know and be sure to share pictures on Instagram (tag us: @artbeads) or in our private Facebook group.

Tags: , ,
Previous Post Next Post

Comments

    • Kyla N.
    • December 5, 2020
    Reply

    All very beautiful but then how can it not be with Swarovski, especially love this angel bracelet.

    • Karen Steinkamp
    • December 5, 2020
    Reply

    I love the angel bracelet!

  1. Reply

    Love all your designs, also love the champagne glasses did you do them as well.?

    1. Reply

      Hi, all of these designs were created by the team at Swarovski.

    • DEE PETERSON
    • December 7, 2020
    Reply

    Beautiful pieces.

  2. 123 HP Deskjet 2600 Printer Setup |Easy Printer Setup Guidelines for HP Deskjet 2600 Setup, Install, Download Printer Driver Download from 123.hp.com/dj2600,

Leave a Reply

Your email address will not be published. Required fields are marked *

0 shares